CBeyond Solar takes pride in its professional, straight-forward solar installation experience. We use only trained solar power installers, supervised by licensed electricians.
Solar Energy Installation works like this: 1)Your roof dimensions are verified and the outline of the panels is marked on the roof. 1)Roof tiles are marked where the structural attachments (feet) will be placed to support the rack, and then the tiles are removed. 1)The feet are installed below the tile and sealed to be water tight. 2)Racking is attached to the feet. 3)Solar panels are loaded onto the racking. 4)An inverter is mounted on the wall located near the main electrical panel. 5)Conduit is run both to the main electrical panel and to the rooftop. 6)Wire is run within the conduit to connect the inverter to the main electrical panel. A main circuit breaker is installed. 7)Wire is run from the inverter to the rooftop where it is connected with the solar panels in a junction box. 8)System voltages are checked to make sure they are within tolerance. The system is switched on and tested. 9)The solar panel system is ready to produce solar power!
CBeyond Solar holds C-10 (Electrical Contractor) and C-46 (Solar Contractor) licenses with the Contractors State License Board.
Home
